Search
Products
    Menu Close

    Formulations

    View as Grid List
    Sort by
    Display per page
    20 gram bottle of Instantbond 127

    Instantbond® 127

    Instantbond® 127 is a gel consistency single component, solvent-less, room temperature adhesive that sets in seconds when confined between two surfaces. The gel consistency allows for gap filling capability and prevents migration to unwanted areas.
    250ml of Metal Cement 850

    Metal Cement 850

    Metal Cement 850 is a single component, silver color gel, that is designed for quick repairing of worn machinery parts. Once confined between parts, it develops a high strength bond with excellent chemical and temperature resistance. The bonded assembly often doubles the strength of press fitted parts. Use Metal Cement 850 in the new assembly to fill the gaps between parts to prevent wear, corrosion and backlash.
    Minebonder_1Liter.png

    Mine Bonder 2000

    Mine Bonder 2000 is an anaerobic adhesive sealant which cures rapidly through large gaps with Hernon Primer 50 and will also provide rapid cure and dry fillets when exposed to high intensity ultraviolet light.
    500 gram bottle of Nuts N' Bolts 128

    Nuts N' Bolts® 128

    Nuts N’ Bolts® 128 is a single component, low strength thread locker designed for locking plastic and metal fasteners. Fixture time is about 5 minutes and adhesive can be pre or post applied. Any excess adhesive on the surface will cure and will not migrate to the other parts. Nuts N’ Bolts® 128 can be used as a low strength thread locker, bonder or tamper proofer for metal, polyester, nylon and many other thermo plastics materials.
    50ml bottle of Nuts N Bolts 220

    Nuts N' Bolts® 220

    Nuts N’ Bolts® 220 is a single component, high strength, anaerobic compound used to lock and seal fine threaded nuts, bolts, and studs in a wide variety of applications.
    50ml bottle of Nuts N Bolts 223

    Nuts N' Bolts® 223

    Nuts N’ Bolts® 223 is a single component, high strength, anaerobic compound used to lock and seal coarse threaded nuts, bolts, and studs in a wide variety of applications. Each batch of Nuts N’ Bolts® 223 is tested to the lot requirements of CID-A-A 59720 Grade AVV, MIL-S22473E Grade AVV, and to the detail requirements of ASTM D5363 (AN0124).
    1 Liter bottle of Nuts N Bolts 225

    Nuts N' Bolts® 225

    Nuts N’ Bolts® 225 is a single component, high strength, anaerobic compound used to lock and seal coarse threaded nuts, bolts, and studs in a wide variety of applications. Each batch of Nuts N’ Bolts® 225 is tested to the lot requirements of CID-A-A 59720 Grade AV, MIL-S-22473E (Grade AV), and to the detail requirements of ASTM D5363 (AN0123).
    50ml bottle of Nuts N Bolts 227

    Nuts N' Bolts® 227

    Nuts N’ Bolts® 227 is a single component, high strength, anaerobic compound used to lock and seal fine threaded nuts, bolts, and studs in a wide variety of applications. Each batch of Nuts N’ Bolts® 227 is tested to the lot requirements of MIL-S-22473E (Grade A), and to the detail requirements of ASTM D5363 (AN0121).
    250ml bottle of Nuts N Bolts 230

    Nuts N' Bolts® 230

    Nuts N’ Bolts® 230 is a single component medium strength, anaerobic compound used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools is necessary. Each batch of Nuts N’ Bolts® 230 is tested to the lot requirements of MIL-S-22473E (Grade B), and to the detail requirements of ASTM D5363 (AN0131).
    250ml bottle of Nuts N Bolts 232

    Nuts N' Bolts® 232

    Nuts N’ Bolts® 232 is a single component medium strength, anaerobic compound used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools is necessary. Each batch of Nuts N’ Bolts 232 is tested to the detailed requirements of ASTM D5363 (AN0141) which replaced MIL-S-22473E (Grade C) specifications.
    250ml bottle of Nuts N Bolts 234

    Nuts N' Bolts® 234

    Nuts N’ Bolts® 234 is a single component medium strength, anaerobic compound used to lock and seal coarse threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools is necessary.
    250ml bottle of Nuts N Bolts 236

    Nuts N' Bolts® 236

    Nuts N’ Bolts® 236 is a single component medium strength, anaerobic compound used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools is necessary. Each batch of Nuts N’ Bolts® 236 is tested to the lot requirements of MIL-S-22473E (Grade CV), and to the detail requirements of ASTM D5363 (AN0142).
    NutsNBolts_1Liter.png

    Nuts N' Bolts® 237

    Nuts N’ Bolts® 237 is a single component, high strength, anaerobic compound used to lock and seal fine threaded nuts, bolts, and studs in a wide variety of applications. Each batch of Nuts N’ Bolts® 237 is tested to the lot requirements of MIL-S-22473E (Grade D), and to the detail requirements of ASTM D5363 (AN0122).
    250ml bottle of Nuts N Bolts 240

    Nuts N' Bolts® 240

    Nuts N’ Bolts® 240 is a single component anaerobic compound used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring easy removal or adjustment. Each batch of Nuts N’ Bolts® 240 is tested to the lot requirements of MIL-S-22473E (Grade E), and to the detail requirements of ASTM D5363 (AN0151).
    250ml bottle of Nuts N Bolts 246

    Nuts N' Bolts® 246

    Nuts N’ Bolts® 246 is a single component anaerobic compound used to lock and seal coarse threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools is necessary. Each batch of Nuts N’ Bolts® 246 is tested to the lot requirements of MIL-S-22473E (Grade HV), and to the detail requirements of ASTM D5363 (AN0162).
    250ml bottle of Nuts N Bolts 248

    Nuts N' Bolts® 248

    Nuts N’ Bolts® 248 is a single component anaerobic compound used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring easy removal or adjustment. Each batch of Nuts N’ Bolts® 248 is tested to the lot requirements of MIL-S-22473E (Grade H), and to the detail requirements of ASTM D5363 (AN0161).
    NutsNBolts_1Liter.png
    NutsNBolts_1Liter.png
    250ml bottle of Nuts N Bolts 410

    Nuts N' Bolts® 410

    Nuts N’ Bolts® 410 is a single component, low viscosity anaerobic adhesive/sealant designed especially for wicking applications. It has the ability to penetrate porous structures and cracks by capillary action, filling voids as large as 0.005 in. Each batch of Nuts N’ Bolts® 410 is tested to the lot requirements of ASTM D5363 (AN0241) and meets the requirements of obsolete MIL-S-46163A (Type III Grade P).
    250ml bottle of Nuts N Bolts 420

    Nuts N' Bolts® 420

    Nuts N’ Bolts® 420 is a single component anaerobic thread locking material, which is thixotropic and develops low strength for easy disassembly. The product cures when confined in the absence of air between close fitting metal surfaces. Each batch of Nuts N’ Bolts® 420 is tested to the lot requirements of ASTM D5363 (AN0311) and complies with MIL-S-46163A (Type II Grade M).
    Filters Close